Information Technical
Plastiline is a high-precision, non-toxic modeling clay. It is sulfur-free and ready to use. Its reproduction accuracy is within 1/10 of a millimeter. It has excellent stability and retains its volume. It also has the advantage of never drying out in air, which means it can be used as many times as needed.
Plastiline does not slump and withstands the exothermic reaction. Plastiline is highly greasy, which allows it to be molded with all molding materials (plaster, resins, alginate, etc.) without the need for a release agent.
Polyurethanes: compatibility is total.
Precautions for use:
Plastiline can generally be handled safely provided certain precautions are observed:
- Wear waterproof gloves and safety goggles (recommended only for prolonged use and if Plastiline is heated, to avoid the risk of splashing).
- After each work period, users must thoroughly wash their skin with warm water and soap. The use of solvents should be avoided.
- Adequate ventilation of the work area is also recommended.
Storage temperature in a dry place, at a temperature between 15° and 25°C, in their original packaging, resealed.
Technical data
Viscosity:
20 dPa.s at T=100°C
30 dPa.s at T= 80°C
Density: d=1.6-1.7
Average particle size: 6 microns (mineral fillers)
Shelf life: 60 months.
Any use of PLASTILINE® for purposes or under conditions other than those presented here is solely your responsibility.
